Bedding plants

Renovate trellis - step by step instructions

Renovate trellis - step by step instructions



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Late autumn is the ideal time to renovate all trellises. Here is a small step-by-step guide on how to proceed.

Renovating trellis is easy

Step 1 - remove plants

Late autumn is the best time to do the renovation because the plants should be cut back anyway during this time. However, before you start with the renovation work, you must first carefully remove the previously cut back main plant shoots from the mesh. The best thing to do is to build a support right next to the respective plant - e.g. an old garden chair - and loosely lay the plant that has been unbraided from the bars Of course, you can also put short shoots on the floor for a short time. It is only important that the individual parts of the plant do not have to show any injuries, which of course also applies to the associated root area.

Step 2 - renovation work

Depending on the type of climbing aid, it can now be renovated on site. However, it is better if you remove the climbing aid, renovate it thoroughly (possibly sand the wood and repaint it) and then reinstall it. In this way, climbing aids can of course also be completely replaced or significantly expanded if necessary.

Step 3 - thread the plant shoots

After the renovation work on the trellises and trellises has been completed, the previously removed plant shoots must, of course, be re-threaded on them. This work requires not only the greatest attention (risk of injury to the plants), but also a little horticultural skill so that the plant can grow out relatively evenly along the trellis in the coming spring.